water transfer
水轉印商標不需溶劑，浸泡純水後即可張貼，再噴上金油保護，也有貼後可以不須噴金油的
免塗裝商標，跟多種特殊外觀裝飾可以表現，可依照產品特性及想呈現的效果選擇。
Does not require solvents, it can be posted after soaking in pure water, and then sprayed with clear coating for protection. There are also have non-clear coating decals. You can choose according to the product characteristics and the effect you want to present.
適用貼於：碳纖維、粉體塗裝、鋁合金、鈦合金、陽極、金屬、複合材料
SUITABLE：carbon, powder coating, aluminium, titanium, anodic coating, metals, composites
- 移除上方保護紙，將商標浸泡純水約1分鐘
- 與底紙離型後貼於黏貼處，再用刮板將水和氣泡刮出，
並使用乾布擦拭表面殘餘水分 - 靜置約1小時後，放進烤箱烘烤80度約30分鐘
- 取出稍作冷卻，再將表面的膜撕去，並噴上金油
以110-130度烘烤30分鐘 (粉體金油控制於180度以上，
若是碳纖車架或塑膠材質的金油外標，則需以80-90度烘烤)
- Remove the separator sheet and soak the transfer decal in
the water for 1 min. - Remove the transfer paper and place decal onto a substrate.
Press down and rub it with a squeegee firmly to exclude water and air between decal and surface. - Waiting for 1 hours. Curing at 80°C for 30 minutes.
- Remove the carrier layer. With a clear coat, cure at
110°C~130°C for 30 minutes for liquid paint or up to 180°C
for powder paint. Carbon frame or plastic material above
clear coat, cure at 80°C-90°C.
｜一般無膜標 HRWT｜
適合高複雜或弧度較大、面積大的圖案，
能良好的適應貼在曲面、轉折處，非平面以及商標開孔。
HRWT is suitable for patterns with high complexity or large radians and large areas.
It can be well adapted to be attached to curved surfaces, turning points, non-planar
surfaces and cut a hole.
噴金油保護為佳 Used with clear coating is better.
｜消/亮光無膜標 Matte and Gloss NPWT｜
常被應用使用消光標貼於亮光車架及商品，或使用亮光標貼於消光車架及商品，
以此凸顯商標，增添對比層次感。
Presents a matte/gloss effect, highlights the characteristics of the decals,
and adds sense of contrast.
不須噴金油 non-clear coating.
｜消/亮光透明無膜標 Matte and Gloss Transparent NPWT｜
呈現被貼物原有的顏色，有效克服以往色差問題，以及省去複雜的製程做法，
展現純粹消/亮光對比的美感；也可做厚度上的選擇，常被應用於球桿增加止滑作用。
To show frame original color with matte or gloss overcome to color difference,
characteristic and economize cost and time. Can also be changed in thickness,
and is often used in clubs to increase the anti-slip effect.
不須噴金油 non-clear coating.
｜電鍍無膜標 CP NPWT｜
表面呈現電鍍金屬色，可用於任何圖案或局部點綴，質感相當高級。
Showing electroplated metal luster, high-grade texture.
噴金油保護為佳 Used with clear coating is better.
｜銀絲無膜標 Silver Hair NPWT｜
表面呈現拉絲紋理，展現金屬材料特有的線紋質感，具風格裝飾效果。
The surface is brushed, showing the unique texture of metal materials,
with a style decoration effect.
可噴金油或不噴金油 Can be used with either clear coating or non-clear coating.
｜浮雕無膜標 Embossment NPWT｜
可於細節處做厚度的選擇，很適合發揮在展現華麗感的裝飾性商標，
同時具有視覺與觸覺反饋的浮雕藝術。
The thickness can be selected in the details, which is very suitable for decorative decals
that show a sense of luxury. Relief carving with both visual and tactile feedback.
可噴金油或不噴金油 Can be used with either clear coating or non-clear coating.
｜立體無膜標 3D-Heat NPWT｜
貼標與被貼物猶如經由模具擠壓，一體成形的效果；貼標後加上噴漆，效果更加。
After painted that just like extrusion molding effect.
可噴金油或不噴金油 Can be used with either clear coating or non-clear coating.
｜反光無膜標 Reflective NPWT｜
光源照射下產生反光效果，具視覺效果；適合應用在昏暗環境與夜間活動。
Reflective effect under the light source, suitable for night activities.
可噴金油或不噴金油 Can be used with either clear coating or non-clear coating.
｜夜光無膜標 Luminous NPWT｜
白天呈現商標原有顏色，晚上則轉變成夜光效果，增加夜間活動安全性。
Shows the original color of the trademark during the day, and turns into
a luminous effect at night, increasing the safety of night activities.
可噴金油或不噴金油 Can be used with either clear coating or non-clear coating.
｜截色無膜標 Water-Slide Masking Decal｜
商標與截色標的結合，同時達到烤漆分色與貼標作業，可有效的縮短操作時間。
Decal and masking decal combine, shorten work time and economize cost.
可噴金油或不噴金油 Can be used with either clear coating or non-clear coating.
Dry Rub on transfer
不需浸水，被貼物表面灰塵油漬等擦拭乾淨後即可直接貼上，可有效縮短貼標作業時間。
無透明邊，貼後再噴上金油保護，成品精美。
Can be attached to the frame or product without immersion in water,
and can effectively shorten the labeling operation time.
適用貼於：碳纖維、粉體塗裝、鋁合金、鈦合金、陽極、金屬、複合材料
SUITABLE：carbon, powder coating, aluminium, titanium, anodic coating, metals, composites
｜感壓標 DRT｜
超薄，具有高附著力、耐磨損、受金油層保護不易剝落。
Super thin, great adhesion, clear coat preserves decal from damage.
噴金油保護為佳 Used with clear coating is better.